Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
5-96 Matrix DFE-Gold Series Configuration Guide
5.2.2.8 show spantree portstate
Use this command to display the state (blocking, forwarding, etc.) for a port on one or more
Spanning Trees.
show spantree portstate [port port-string] [sid sid]
Syntax Description
Command Defaults
• If port-string is not specified, current state will be displayed for all Spanning
Tree ports.
• If sid is not specified, current port state will be displayed for Spanning Tree 0.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Spanning Tree state for fe.1.7:
port port-string (Optional) Displays the Spanning Tree state for specific
Spanning Tree port(s). For a detailed description of
possible port-string values, refer to Section 3.1.1.
sid sid (Optional) Displays the state for a specific Spanning Tree
identifier. Valid values are 0 - 4094. If not specified, SID
0 is assumed.
Matrix(rw)->show spantree portstate port fe.1.7
Port fe.1.7 has a Port State of Forwarding on SID 0