Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
5-78 Matrix DFE-Gold Series Configuration Guide
5.2.1.69 set spantree backuproottrapenable
Use this command to enable or disable the Spanning Tree backup root trap function. When SNMP
trap messageing is configured, this sends a trap message when the back up root function makes a
Spanning Tree the new root of the network.
set spantree backuproottrapenable {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the backup root trap function:
enable | disable Enables or disables the backup root trap function.
Matrix(rw)->set spantree backuproottrapenable enable