Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
Matrix DFE-Gold Series Configuration Guide 5-69
5.2.1.60 show spantree spanguardlock
Use this command to display the span guard lock status of one or more ports.
show spantree spanguardlock port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the span guard lock status for ge.2.1:
port-string Specifies the port(s) for which to show span guard lock
status. For a detailed description of possible port-string
values, refer to Section 3.1.1.
Matrix(rw)->show spantree spanguardlock ge.2.1
spanguard status for port ge.2.1 is UNLOCKED.