Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
Matrix DFE-Gold Series Configuration Guide 5-9
Root Forward Delay Amount of time (in seconds) the root device
spends in listening or learning mode.
Bridge ID MAC Address Unique bridge MAC address, recognized by all
bridges in the network.
Bridge ID Priority Bridge priority, which is a default value, or is
assigned using the set spantree priority
command. For details, refer to Section 5.2.1.25.
Bridge Max Age Maximum time (in seconds) the bridge can wait
without receiving a configuration message (bridge
“hello”) before attempting to reconfigure. This is
a default value, or is assigned using the set
spantree maxage command. For details, refer to
Section 5.2.1.34.
Bridge Hello Time Amount of time (in seconds) the bridge sends
BPDUs. This is a default value, or is assigned
using the set spantree hello command. For
details, refer to Section 5.2.1.31.
Bridge Forward Delay Amount of time (in seconds) the bridge spends in
listening or learning mode. This is a default value,
or is assigned using the set spantree fwddelay
command. For details, refer to Section 5.2.1.37.
Topology Change Count Number of times topology has changed on the
bridge.
Time Since Top Change Amount of time (in days, hours, minutes and
seconds) since the last topology change.
Max Hops Maximum number of hops information for a
particular Spanning Tree instance may traverse
(via relay of BPDUs within the applicable MST
region) before being discarded. This is a default
value, or is assigned using the set spantree
mashops command. For details, refer to
Section 5.2.1.52.
Table 5-1 show spantree Output Details (Continued)
Output What It Displays...