Specifications

Startup and General Configuration Summary
Process Overview: CLI Startup and General Configuration
2-10 Matrix DFE-Gold Series Configuration Guide
2.1.5 Process Overview: CLI Startup and General Configuration
Use the following steps as a guide to the startup and general configuration process:
1. Starting and navigating the Command Line Interface (CLI) (Section 2.1.6)
2. Configuring the Line Editor (Section 2.1.7)
3. Setting user accounts and passwords (Section 2.2.1)
4. Enabling or disabling of the management authentication notification MIB (Section 2.2.2)
5. Setting basic device properties (Section 2.2.3)
6. Activating licensed features (Section 2.2.4)
7. Configuring Power over Ethernet (PoE) (Section 2.2.5)
8. Downloading a new firmware image (Section 2.2.6)
9. Reviewing and selecting the boot firmware image (Section 2.2.7)
10.Starting and configuring Telnet (Section 2.2.8)
11.Managing image and configuration files (Section 2.2.9)
12.Configuring the CDP and Cisco discovery protocol (Section 2.2.10)
13.Enabling or disabling the MTU discovery protocol (Section 2.2.11)
14.Pausing, clearing and closing the CLI (Section 2.2.12)
15.Resetting the device (Section 2.2.13)
16.Gathering Technical Support Information (Section 2.2.14)
17.Preparing the device for router mode (Section 2.3)