Specifications

Overview: Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
3-106 Matrix DFE-Gold Series Configuration Guide
3.5.4.8 clear lacp static
Use this command to remove specific ports from a Link Aggregation Group.
clear lacp static lagportstring port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove Fast Ethernet port 6 in module 1 from the LAG of aggregator
port 4:
lagportstring Specifies the LAG aggregator port from which ports will
be removed.
port-string Specifies the port(s) to remove from the LAG. For a
detailed description of possible port-string values, refer
to Section 3.1.1.
Matrix(rw)->clear lacp static lag.0.4 fe.1.6