Specifications

Overview: Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
Matrix DFE-Gold Series Configuration Guide 3-99
3.5.4.2 set lacp
Use this command to disable or enable the Link Aggregation Control Protocol (LACP) on the
device. LACP is enabled by default.
set lacp {disable | enable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable LACP:
disable | enable Disables or enables LACP.
Matrix(rw)->set lacp disable