Specifications

Startup and General Configuration Summary
Factory Default Settings
Matrix DFE-Gold Series Configuration Guide 2-5
Spanning Tree priority Bridge priority is set to 32768.
Spanning Tree
topology change trap
suppression
Enabled.
Spanning Tree transmit
hold count
Set to 3.
Spanning Tree version Set to mstp (Multiple Spanning Tree Protocol).
SSH Disabled.
System baud rate Set to 9600 baud.
System contact Set to empty string.
System location Set to empty string.
System name Set to empty string.
Terminal CLI display set to 80 columns and 24 rows.
Timeout Set to 15 minutes.
User names Login accounts set to ro for Read-Only access; rw for Read-Write
access; and admin for Super User access.
VLAN dynamic egress Disabled on all VLANs.
VLAN ID All ports use a VLAN identifier of 1.
WebView (HTTP) Enabled on TCP port 80.
Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature Default Setting