Specifications

Startup and General Configuration Summary
Factory Default Settings
2-4 Matrix DFE-Gold Series Configuration Guide
RADIUS last resort
action
When the client is enabled, set to Challenge.
RADIUS retries When the client is enabled, set to 3.
RADIUS timeout When the client is enabled, set to 20 seconds.
Rate limiting Disabled (globally and on all ports).
SNMP Enabled.
SNTP Disabled.
Spanning Tree Globally enabled and enabled on all ports.
Spanning Tree edge
port administrative
status
Enabled.
Spanning Tree edge
port delay
Enabled.
Spanning Tree forward
delay
Set to 15 seconds.
Spanning Tree hello
interval
Set to 2 seconds.
Spanning Tree ID
(SID)
Set to 0.
Spanning Tree legacy
path cost
Disabled.
Spanning Tree
maximum aging time
Set to 20 seconds.
Spanning Tree
point-to-point
Set to auto for all Spanning Tree ports.
Spanning Tree port
priority
All ports with bridge priority are set to 128 (medium priority).
Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature Default Setting