Specifications

Startup and General Configuration Summary
Factory Default Settings
Matrix DFE-Gold Series Configuration Guide 2-3
MAC aging time Set to 300 seconds.
MAC locking Disabled (globally and on all ports).
Management
Authentication
Notification
Enabled
MTU discovery
protocol
Enabled.
Passwords Set to an empty string for all default user accounts. User must press
ENTER at the password prompt to access CLI.
Password aging Disabled.
Password history No passwords are checked for duplication.
Policy classification Classification rules are automatically enabled when created.
Port auto-negotiation Enabled on all ports.
Port advertised ability Maximum ability advertised on all ports.
Port broadcast
suppression
Disabled (no broadcast limit).
Port duplex mode Set to half duplex, except for 100BASE-FX and 1000BASE-X,
which is set to full duplex.
Port enable/disable Enabled.
Port priority Set to 1.
Port speed Set to 10 Mbps, except for 1000BASE-X, which is set to 1000 Mbps,
and 100BASE-FX, which is set to 100 Mbps.
Port trap All ports are enabled to send link traps.
Priority classification Classification rules are automatically enabled when created.
RADIUS client Disabled.
Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature Default Setting