Specifications

Port Configuration Command Set
Reviewing Port Status
Matrix DFE-Gold Series Configuration Guide 3-29
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and traffic
through the device for fe.3.1:
This example shows how to display all fe.3.1 port counter statistics related to traffic through the
device.
Matrix(rw)->show port counters fe.3.1
Port: fe.3.1 MIB2 Interface: 1 Bridge Port: 2
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets 0
In Unicast Pkts 0
In Multicast Pkts 0
In Broadcast Pkts 0
In Discards 0
In Errors 0
In Unknown Protocol 0
Out Octets 0
Out Unicasts Pkts 0
Out Multicast Pkts 0
Out Broadcast Pkts 0
Out Errors 0
Out Queue Length 256
802.1Q Switch Counters
----------------------
Frames Received 0
Frames Transmitted 0
Frames Filtered 0
Matrix(rw)->show port counters fe.3.1 switch
Port: fe.3.1 Bridge Port: 2
No counter discontinuity time
802.1Q Switch Counters
-------------------------------------------
Frames Received 0
Frames Transmitted 0
Frames Filtered 0