Specifications

Preparing the Device for Router Mode
Enabling Router Configuration Modes
2-188 Matrix DFE-Gold Series Configuration Guide
Router
Configuration
Mode
Set IP protocol
parameters.
Type router and the
protocol name (and,
for OSPF, the
instance ID) from
Global or Interface
Configuration mode.
Matrix>Router1
(config-router)#
Key Chain
Configuration
Mode
Set protocol (RIP)
authentication key
parameters.
Type key chain and
the key chain name
from Router (RIP)
Configuration mode.
Matrix>Router1
(config-keychain)#
Key Chain Key
Configuration
Mode
Configure a specific
key within a RIP
authentication key
chain.
Type key
and the
key-id from Key
Chain Configuration
Mode.
Matrix>Router1
(config-keychain-key)#
Route Map
Configuration
Mode
Configure route
maps 1-99.
Type route-map, an
id-number, and
permit or deny from
Global Configuration
Mode.
Matrix>Router1
(config-route-map)#
Policy-Based
Routing
Configuration
Mode
Configure
policy-based
routing for route
maps 100-199.
Type route-map, an
id-number, and
permit or deny from
Global Configuration
Mode.
Matrix>Router1
(config-route-map-pbr)#
Server Load
Balancing (SLB)
Server Farm
Configuration
Mode
Configure an
LSNAT server
farm.
Type ip slb
serverfarm and the
serverfarmname
from Global
Configuration Mode.
Matrix>Router1
(config-slb-sfarm)#
Table 2-14 Router CLI Configuration Modes (Continued)
Use this mode... To... Access method... Resulting Prompt...