Specifications

Preparing the Device for Router Mode
Reviewing and Configuring Routing Modules
2-186 Matrix DFE-Gold Series Configuration Guide
2.3.2.4 router
Use this command to enable routing mode on a module. This must be a module previously
configured for routing using the set router command as described in Section 2.3.2.2. Routing may
be configured on one or two modules.
In the Matrix DFE-Gold Series chassis and N standalone devices, routing must be configured on
module 1. If a redundancy license is available, routing redundancy must be configured on module 2.
router module
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable routing on module 1:
module Specifies the module on which to enable routing mode.
Matrix(rw)->router 1