Specifications

Preparing the Device for Router Mode
Reviewing and Configuring Routing Modules
2-184 Matrix DFE-Gold Series Configuration Guide
2.3.2.2 set router
Use this command to configure routing on a module.
set router module
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set module 1 as a routing module:
module Specifies the module to configure for routing. In the
Matrix DFE-Gold Series chassis and N standalone
devices, routing must be configured on module 1. If a
redundancy license is available, routing redundancy must
be configured on module 2.
Matrix(rw)->set router 1