Specifications

Preparing the Device for Router Mode
Reviewing and Configuring Routing Modules
Matrix DFE-Gold Series Configuration Guide 2-183
2.3.2.1 show router
Use this command to display which modules are configured for routing.
show router
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to display which modules are configured for routing:
Table 2-13 provides an explanation of the command output.
Matrix(rw)->show router
Module VID IP Address Mask
------------------------------------------------------------
RUNNING :: 3 100 168.192.100.1 255.255.255.0
Table 2-13 show router Output Details
Output What It Displays...
Module Number of the module configured for routing.
VID VLAN ID of the first (lowest) routing interface.
IP Address Module’s IP address.
Mask Module’s IP mask.