Specifications

General Configuration Command Set
Resetting the Device
Matrix DFE-Gold Series Configuration Guide 2-173
2.2.13.2 reset
Use this command to reset the device without losing any user-defined configuration settings
reset {[mod | system] [cancel]}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Examples
This example shows how to reset the system:
This example shows how to cancel a scheduled system reset:
NOTE: A Matrix Series device can also be reset with the RESET button located on its
front panel. For information on how to do this, refer to the Matrix Installation Guide
shipped with your device.
mod Specifies a module to be reset.
system Resets the system.
cancel Cancels a reset scheduled using the reset at command as
described in Section 2.2.13.3, or the reset in command as
described in Section 2.2.13.4.
Matrix(rw)->reset
This command will reset the system and may disconnect your telnet session.
Do you want to continue (y/n) [n
]? y
Resetting...
Matrix(rw)->reset cancel
Reset cancelled.