Specifications

General Configuration Command Set
Configuring CDP and Cisco Discovery Protocol
Matrix DFE-Gold Series Configuration Guide 2-153
Table 2-10 show ciscodp Output Details
Output What It Displays...
CiscoDP Whether Cisco Discovery Protocol is disabled or enabled
globally. Auto indicates that Cisco DP will be globally
enabled only if Cisco DP PDUs are received. Default setting
of auto can be changed with the set ciscodp status
command as described in Section 2.2.10.10.
Timer Number of seconds between Cisco Discovery Protocol PDU
transmissions. Default value of 60 can be changed with the
set ciscodp timer command as described in
Section 2.2.10.11.
Holdtime (TTL) Number of seconds neighboring devices will hold PDU
transmissions from the sending device. Default value of 180
can be changed with the set ciscodp holdtime command as
described in Section 2.2.10.12.
Device ID Sending device’s serial number.