Specifications

General Configuration Command Set
Configuring CDP and Cisco Discovery Protocol
2-152 Matrix DFE-Gold Series Configuration Guide
2.2.10.8 show ciscodp
Use this command to display global Cisco Discovery Protocol information.
show ciscodp
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Cisco Discovery Protocol information. In this case, defaults
have not been changed:
Table 2-10 provides an explanation of the command output.
Matrix>show ciscodp
CiscoDP : Auto
Timer : 60
Holdtime (TTL) : 180
Device ID : 00E06314BD57
Last Change : WED FEB 08 01:07:45 2006