Specifications

General Configuration Command Set
Configuring CDP and Cisco Discovery Protocol
2-146 Matrix DFE-Gold Series Configuration Guide
Table 2-9 provides an explanation of the command output.
Table 2-9 show cdp Output Details
Output What It Displays...
CDP Global
Status
Whether CDP is globally auto-enabled, enabled or disabled.
The default state of auto-enabled can be reset with the set
cdp state command. For details, refer to Section 2.2.10.3.
CDP Versions
Supported
CDP version number(s) supported by the device.
CDP Hold Time Minimum time interval (in seconds) at which CDP
configuration messages can be set. The default of 180
seconds can be reset with the set cdp hold-time command.
For details, refer to Section 2.2.10.6.
CDP
Authentication
Code
Authentication code for CDP discovery protocol. The
default of 00-00-00-00-00-00-00-00 can be reset using the
set cdp auth command. For details, refer to
Section 2.2.10.4.
CDP Transmit
Frequency
Frequency (in seconds) at which CDP messages can be
transmitted. The default of 60 seconds can be reset with the
set cdp interval command. For details, refer to
Section 2.2.10.5.
Port Port designation. For a detailed description of possible
port-string values, refer to Section 3.1.1.
Status Whether CDP is enabled, disabled or auto-enabled on the
port.