Specifications

General Configuration Command Set
Configuring CDP and Cisco Discovery Protocol
2-144 Matrix DFE-Gold Series Configuration Guide
2.2.10.1 show neighbors
Use this command to display Network Neighbor Discovery information from either CDP or Cisco
Discovery Porotocol.
show neighbors [port-string]
Syntax Description
Command Defaults
If port-string is not specified, all Network Neighbor Discovery information will be
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Network Neighbor Discovery information:
port-string (Optional) Displays Network Neighbor Discovery
information for a specific port. For a detailed description of
possible port-string values, refer to Section 3.1.1.
Matrix(rw)->show neighbors
Port Device ID Port ID Type Network Address
------------------------------------------------------------------------------
fe.1.3 00-01-f4-27-cd-69 10.1.26.153 cdp 10.1.26.153
fe.1.12 00-e0-63-14-e1-e6 10.1.26.24 cdp 10.1.26.24
fe.1.46 0001f40070b6 192.168.100.112 ciscodp 192.168.100.112
fe.1.46 00-01-f4-46-d8-c0 130.10.0.48 cdp 0.0.0.0
fe.1.48 0001f4007f4a 192.168.1.9 ciscodp 192.168.1.9