Specifications

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
13-188 Matrix DFE-Gold Series Configuration Guide
13.3.15.6 clear flowlimit action
Use this command to remove a flow limiting action configuration.
clear flowlimit {action1 | action2} [notify] [drop] [disable] [userport |
serverport | aggregateduser | interswitchlink | unspecified]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
• If not specified, all action types will be removed.
• If not specified, the action will be removed from all port classifications.
Example
This example shows how to remove flow limiting
action 1 from all port classifications:
action1 | action2 Specifies the configuration to be removed as action 1 or 2.
notify (Optional) Removes the notify action.
drop (Optional) Removes the drop action.
disable (Optional) Removes the disable action.
userport |
serverport |
aggregateduser |
interswitchlink |
unspecified
(Optional) Removes this action configuration from the user
classification port type:
• user port
• server port
• aggregation port
• inter-switch link
• unspecified port
Matrix(rw)->clear flowlimit action1