Specifications

Security Configuration Command Set
Configuring Access Lists
13-152 Matrix DFE-Gold Series Configuration Guide
13.3.12.2 access-list (standard)
Use this command to define a standard IP access list by number when operating in router mode.
Restrictions defined by an access list are applied by using the
ip access-group command
(Section 13.3.12.4).
access-list access-list-number [insert | replace entry] | [log 1-5000 | all] [move
destination source1 [source2]] {deny | permit} source [source-wildcard]
To insert or replace an ACL entry:
access-list access-list-number insert | replace entry
To move entries within an ACL:
access-list access-list-number move destination source1 [source2]
NOTE: Valid access-list-numbers for standard ACLs are 1 to 99. For extended ACLs,
valid values are 100 to 199.