Specifications

Security Configuration Command Set
Configuring Multiple Authentication
13-136 Matrix DFE-Gold Series Configuration Guide
13.3.10.10 show multiauth session
Use this command to display multiple authentication session entries.
show multiauth session [all] [agent {dot1x | mac | pwa | cep}] [mac address]
[port port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no options are specified, multiple authentication session entries will be displayed
for all sessions, authentication types, MAC addresses, and ports.
Example
This example shows how to display multiple authentication session:
all (Optional) Displays information about all sessions,
including those with terminated status.
agent | dot1x |
mac | pwa | cep
(Optional) Displays 802.1X, MAC, CEP, or port web
authentication session information.
mac address (Optional) Displays multiple authentication session entries
for specific MAC address(es).
port port-string (Optional) Displays multiple authentication session entries
for specific port(s).
Matrix(rw)->show multiauth session
Multiple authentication session entries
-----------------------------------------
Port : fe.2.2 Station address : 00-01-f4-2b-4f-8b
Auth status : success Last attempt : MON MAY 08 14:34:42 2006
Agent type : pwa Session applied : true
Server type : radius VLAN-Tunnel-Attr : None
Policy index : 0 Policy name : No policy applied
Session timeout : 43200 Session duration : 0,00:01:01
Idle timeout : 300 Idle time : 0,00:00:00
Termination time: Not Terminated