Specifications

Security Configuration Command Set
Configuring Multiple Authentication
Matrix DFE-Gold Series Configuration Guide 13-125
13.3.10 Configuring Multiple Authentication
About Multiple Authentication
When enabled, multiple authentication allows multiple users to authenticate using up to three
methods on the same port, and receive a policy traffic profile based on the RADIUS configuration.
When multi-authentication ports have a combination of authentication methods enabled, and a user
is successfully authenticated in more than one way at the same time, the precedence of the
authentication methods will determine which RADIUS-returned filter ID will be processed and
result in an applied traffic policy profile.
Purpose
To configure multiple authentication.
Commands
The commands used to configure multiple authentication are listed below and described in the
associated section as shown:
• set multiauth mode (Section 13.3.10.1)
• clear multiauth mode (Section 13.3.10.2)
• set multiauth precedence (Section 13.3.10.3)
• clear multiauth precedence (Section 13.3.10.4)
• show multiauth port (Section 13.3.10.5)
• set multiauth port (Section 13.3.10.6)
• clear multiauth port (Section 13.3.10.7)
• show multiauth station (Section 13.3.10.8)
• clear multiauth station (Section 13.3.10.9)
• show multiauth session (Section 13.3.10.10)
• show multiauth idle-timeout(Section 13.3.10.11)
• set multiauth idle-timeout(Section 13.3.10.12)
• clear multiauth idle-timeout(Section 13.3.10.13)
• show multiauth session-timeout(Section 13.3.10.14)