Specifications

Security Configuration Command Set
Configuring MAC Locking
Matrix DFE-Gold Series Configuration Guide 13-111
13.3.9.1 show maclock
Use this command to display the status of MAC locking on one or more ports.
show maclock [port_string]
Syntax Description
Command Defaults
If port_string is not specified, MAC locking status will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for ge.2.1 through 5:
Table 13-6 provides an explanation of the command output.
port_string (Optional) Displays MAC locking status for specified
port(s). For a detailed description of possible port_string
values, refer to Section 3.1.1.
Matrix(rw)->show maclock ge.2.1-5
MAC locking is globally enabled.
Port Port Trap Max Static Max FirstArrival Violating
Number Status Status Allocated Allocated MAC Address
-------- -------- -------- ---------- ---------------- -----------------
ge.2.1 enabled enabled 20 600 00-00-00-00-00-00
ge.2.2 enabled enabled 20 600 00-00-00-00-00-00
ge.2.3 enabled enabled 20 600 00-00-00-00-00-00
ge.2.4 enabled enabled 20 600 00-00-00-00-00-00
ge.2.5 enabled enabled 20 600 00-00-00-00-00-00