Specifications

Security Configuration Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix DFE-Gold Series Configuration Guide 13-107
13.3.8.13 set cep initialize
Use this command to clear all existing CEP connections for one or more CEP-enabled ports. This
command is similar to the clear cep users command.
set cep initialize port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to re-initialize CEP ports fe.1.3-5
:
port-string Specifies the CEP-enabled port(s) to clear existing CEP
connections. This must be a port-string enabled for CEP
using the set cep port command as described in
Section 13.3.8.6. For a detailed description of possible
port-string values, refer to Section 3.1.1.
Matrix>set cep initialize fe.1.3-5