Specifications

Security Configuration Command Set
Configuring Convergence End Points (CEP) Phone Detection
13-96 Matrix DFE-Gold Series Configuration Guide
13.3.8.2 show cep detection
Use this command to display CEP phone detection parameters.
show cep detection <detection-id>
Syntax Description
Command Defaults
None
Command Mode
Read-Only.
Examples
This example shows how to display CEP detection information:
detection
<detection-id>
Show all CEP detection parameters or show CEP detection
parameters, based on the CEP configuration group id.
Matrix>show cep detection
Global CEP state enabled
Detection Rules for Index 1:
Endpoint Phone Type h323
Protocol tcp & udp
Port Low 1718
Port High 1720
Address Type unknown
Address
Mask Type unknown
Mask
Row Status enabled