Specifications

General Configuration Command Set
Activating Licensed Features
Matrix DFE-Gold Series Configuration Guide 2-91
2.2.4.1 set license
When an advanced license is available, use this command to activate licensed features. If this is
available on your Matrix Series device, a unique license key will display in the show license
command output.
set license {advanced | redundancy} license-key [slot slot]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If not specified, the license will be bound to all modules.
Example
This example shows how to use license key abcdefg123456789 to activate advanced routing
features:
advanced Activates advanced routing features.
redundancy Activates management module redundancy.
license-key Specifies your unique 16-digit hexadecimal advanced
licensing key.
NOTE: When available, the licensing key will
display at the top of the show running-config
command output.To see an example of this
output, refer to Section 11.2.2.1.
slot slot (Optional) Specifies a module to which the license will be
bound.
Matrix(rw)->set license advanced abcdefg123456789