Specifications

Security Configuration Command Set
Configuring MAC Authentication
13-86 Matrix DFE-Gold Series Configuration Guide
13.3.7.13 set macauthentication reauthentication
Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
set macauthentication reauthentication {enable | disable} port-string
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to enable MAC reauthentication on ge.4.1 though 5:
enable | disable Enables or disables MAC reauthentication.
port-string Specifies port(s) on which to enable or disable MAC
reauthentication. For a detailed description of possible
port-string values, refer to Section 3.1.1.
Matrix(rw)->set macauthentication reauthentication enable ge.4.1-5