Specifications

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
13-66 Matrix DFE-Gold Series Configuration Guide
13.3.6.19 set pwa maxrequests
Use this command to set the maximum number of log on attempts allowed before transitioning the
PWA port to a held state.
set pwa maxrequests requests [port-string]
Syntax Description
Command Type
Switch command.
Command Defaults
If port-string is not specified, maximum requests will be set for all ports.
Command Mode
Read-Write.
Example
This example shows how to set the PWA maximum requests to 3 for all ports:
maxrequests Specifies the maximum number of log on attempts.
port-string (Optional) Sets the maximum requests for specific
port(s). For a detailed description of possible port-string
values, refer to Section 3.1.1.
Matrix(rw)->set pwa maxrequests 3