Specifications

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix DFE-Gold Series Configuration Guide 13-45
Commands
The commands needed to review and configure PWA are listed below and described in the
associated section as shown:
• show pwa (Section 13.3.6.1)
• set pwa (Section 13.3.6.2)
• set pwa hostname (Section 13.3.6.3)
• clear pwa hostname (Section 13.3.6.4)
• show pwa banner (Section 13.3.6.5)
• set pwa banner (Section 13.3.6.6)
• clear pwa banner (Section 13.3.6.7)
• set pwa displaylogo (Section 13.3.6.8)
• set pwa redirecttime (Section 13.3.6.9)
• set pwa ipaddress (Section 13.3.6.10)
• set pwa protocol (Section 13.3.6.11)
• set pwa enhancedmode (Section 13.3.6.12)
• set pwa guestname (Section 13.3.6.13)
• clear pwa guestname (Section 13.3.6.14)
• set pwa guestpassword (Section 13.3.6.15)
• set pwa gueststatus (Section 13.3.6.16)
• set pwa initialize (Section 13.3.6.17)
• set pwa quietperiod (Section 13.3.6.18)
• set pwa maxrequests (Section 13.3.6.19)
• set pwa portcontrol (Section 13.3.6.20)
• show pwa session (Section 13.3.6.21)