Specifications

Security Configuration Command Set
Configuring TACACS+
13-26 Matrix DFE-Gold Series Configuration Guide
Example
This example shows how to display TACACS configuration information:
Table 13-2 provides an explanation of the command output.
Matrix E7 Platinum(su)->show tacacs
TACACS+ state: enabled
TACACS+ session accounting state: disabled
TACACS+ command authorization state: disabled
TACACS+ command accounting state: disabled
TACACS+ single-connect state: disabled
TACACS+ service: exec
TACACS+ session authorization A-V pairs:
access level attribute value
read-only 'priv-lvl' '0'
read-write 'priv-lvl' '1'
super-user 'priv-lvl' '15'
TACACS+ Server IP Address Port Timeout Status
-------------- --------------- ----- ------- -------
1 10.1.26.245 49 10 Active
Table 13-2 show Tacacs+ Output Details
Output What It Displays...
TACACS+ state Whether the TACACS+ client is enabled or disabled.
TACACS+ session
accounting state
Whether the TACACS+ client session accounting state is
enabled or disabled.
TACACS+
command
authorization state
Whether the TACACS+ client command authorization state
is enabled or disabled.
TACACS+
command
accounting state
Whether the TACACS+ client command accounting state is
enabled or disabled.
TACACS+
singleconnect state
Whether the TACACS+ server singleconnect state is
enabled or disabled.
TACACS+ service The service to be requested for management session
authorization