Specifications

Security Configuration Command Set
Configuring RADIUS
13-8 Matrix DFE-Gold Series Configuration Guide
13.3.1.3 clear authentication login
Use this command to reset the authentication login method to the default setting of “any”.
clear authentication login
Syntax Description
None.
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to reset the authentication login method:
13.3.2 Configuring RADIUS
Purpose
To perform the following:
• Review the RADIUS client/server configuration on the device.
• Enable or disable the RADIUS client.
• Set local and remote login options.
• Set primary and secondary server parameters, including IP address, timeout period,
authentication realm, and number of user login attempts allowed.
• Reset RADIUS server settings to default values.
• Configure a RADIUS accounting server.
Matrix(rw)->clear authentication login