Specifications

Security Configuration Command Set
Setting the Authentication Login Method
Matrix DFE-Gold Series Configuration Guide 13-7
13.3.1.2 set authentication login
Use this command to set the authentication login method.
set authentication login {any | local | radius | tacacs}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the authentication login method to use the local password settings:
any Specifies that the authentication protocol will be selected
using the following precedence order:
• TACACS+
• RADIUS
• Local
local Specifies that the local network password settings will be
used for authentication login.
radius Specifies that RADIUS will be used for authentication
login.
tacacs Specifies that TACACS + will be used for authentication
login
Matrix(rw)->set authentication login local