Specifications

Routing Protocol Configuration Command Set
Configuring VRRP
Matrix DFE-Gold Series Configuration Guide 12-107
12.2.6.13 show ip vrrp
Use this command to display VRRP routing information.
show ip vrrp
Syntax Description
None.
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
None.
Example
This example shows how to display VRRP information:
Matrix>Router1(config)#show ip vrrp
-----------VRRP CONFIGURATION-----------
Vlan Vrid State Owner AssocIpAddr Priority VirtMacAddr
2 1 Init 0 25.25.2.1 100 0000.05e0.0011