Specifications

Routing Protocol Configuration Command Set
Configuring OSPF
12-70 Matrix DFE-Gold Series Configuration Guide
Table 12-5 provides an explanation of the command output.
Table 12-5 show ip ospf neighbor Output Details
Output What It Displays...
ID Neighbor’s router ID of the OSPF neighbor.
Pri Neighbor’s priority over this interface.
State Neighbor’s OSPF communication state.
Dead-Int Interval (in seconds) this router will wait without receiving a
Hello packet from a neighbor before declaring the neighbor
is down.
Address Neighbor’s IP address.
Interface Neighbor’s interface (VLAN).