Installation guide

Memory Locations and Replacement Procedures

B-8 Mode Switch Bank Settings and Optional Installations

Installing the DIMM on 4G4202-72 or 4G4282-49

ToinstallaDIMM,refertoFigure B‐8andproceedasfollows:

1. PushtheconnectorarmsawayfromtheDIMMenoughtoinserttheDIMMintothe

connectorcontacts.

2. InserttheDIMMstraightdownbetweentheconnectorcontactsenoughforthetabs

ontheconnectorarmstoalignwiththetwoDIMM

alignmentnotches.

3. PushtheDIMMdownintotheconnectorcontacts,thenrotatethetwoconnectorarms

towardtheDIMMtolock itintoplace.

Figure B-8 Installing the DIMM on 4G4202-72

or 4G4282-49

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 DIMM Connector arms 3 Connector contacts

2 DIMM 4 DIMM alignment notches (2)