Installation guide

Completing the Installation
Matrix DFE-Gold Series Installation Guide 3-29
Completing the Installation
CompletionoftheDFEmoduleinstallationdependsuponthetypeofsysteminwhichthe
moduleisbeinginstalled.
•IfinstallinginanewDFEmodulesystem,referto“CompletingtheInstallation”on
page 3‐29.
•Ifinstallinginanestablished,operatingDFEmodulesystem,referto“Completingthe
Installationof
aDFE‐GoldModuleinanExistingSystem”onpage 3‐31.
Completing the Installation of a New System
InanewsystemofDFEmodules,oneoftheinstalledDFEmoduleswillbecomethe
managementmoduleonchassispowerup,andallDFEmoduleswillautomaticallybeset
tothefactorydefaultvalues.Acompletelistofthefactorydefaultvaluesareprovidedin
Chapter3oftheMatrix DFE
‐GoldSeriesConfigurationGuide.
AfterinstallingallDFE‐Goldmodules intothehostchassisandmakingtheconnectionsto
thenetwork,proceedtothefollowingFirst‐TimeLog‐InUsingaConsolePortConnection
proceduretoaccessthemodulemanagementstartupscreenfromyourPC,terminal,or
modemconnection.
Modem Port Adapter Wiring and Signal Diagram
RJ45 DB25
Pin Conductor Pin Signal
1 Blue 2 Transmit (TX)
2 Orange 8 Data Carrier Detect (DCD)
4 Red 3 Receive
5 Green 7 Ground (GRD)
6 Yellow 20 Data Terminal Ready (DTR)
8 Gray 22 Ring Indicator
RJ45 Connector (Female)
81
Pins
DB25 Connector (Male)
131
Pins
14 25