Installation guide

Connecting to COM Port for Local Management
Matrix DFE-Gold Series Installation Guide 3-27
5. WithaPCconnectedtoaremotemodem,youcanconfiguretheswitchremotely.To
accomplishthis,youmustconfigureyourPCVTemulationpackagewiththe
followingparameters.
6. Whentheseparametersareset,theLocalManagementpasswordscreenwilldisplay.
RefertotheMatrix DFE‐GoldSeriesConfigurationGuideforfurther
information.
Figure 3-17 Connecting to a Modem
Parameter Setting
Mode 7 Bit Control
Transmit Transmit=9600
Bits Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit
1 UTP straight-through cable with RJ45 connectors 4 Local modem
2 RJ45 COM port 5 Remote modem
3 RJ45-to-DB25 modem adapter 6 Remote PC
COM
OFFLINE/
RESET
GROUP 3
GROUP 1 GROUP 2
CPU
MGMT
1X
6X
4G4202-72
Gb ENET
Á
Ä ÂÃ ÀÅ