Installation guide

Memory Locations and Replacement Procedures

Matrix DFE-Platinum Series Hardware Installation Guide B-5

Installing the DIMM

ToinstallaDIMM,refertoFigure B‐5andproceedasfollows:

1. InserttheDIMMdownbetweentheconnectorfingers.

2. PivottheDIMMdownwardsothetabsontheconnectorarmsalignwiththetwoDIMM

alignmentnotches.Withthetwoconnectorarmsspreadoutward,pushtheDIMMdown

betweentheconnector

arms.ThenreleasethetwoconnectorarmstolocktheDIMMinto

place.

Figure B-5 Installing the DIMM

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive electronic

equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de

seguridad para evitar descargas de electricidad estática.

1 DIMM 3 Connector arms

2 Connector fingers 4 DIMM alignment notches (2)