Installation guide

Matrix DFE-Platinum Series Installation Guide 3-1
3
Installation
ThischapterprovidestheinstructionstoinstalltheDFE‐Platinum2G4082‐25module.
Followtheorderofthesectionslistedbelowtocorrectlyinstallthemodule.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Important Notice
Read the Release Notes shipped with the DFE-Platinum module to check for any exceptions to the supported
features and operation documented in this guide.
For information about... Refer to page...
Unpacking the DFE-Platinum Module 3-2
Installing Optional Network Expansion Modules 3-2
Installing Module into Matrix E7 or N7 Chassis 3-2
Installing Module into Matrix N1, N3, or N5 Chassis 3-5
Connecting to the Network 3-6
Connecting to COM Port for Local Management 3-10
Completing the Installation of a New System 3-15