Installation guide

Using LANVIEW
Troubleshooting 4-3
Table 4-1 LANVIEW LEDs
LED Color State Recommended Action
MGMT None Off. This module is NOT
the Management Module.
None.
Green Solid. This module is the
designated Management
Module.
None.
Amber Flashing. This is a
temporary indication that
the module is saving
data.
None.
CPU None Power off. Ensure chassis has adequate power.
Amber Blinking. Module in
process of booting.
None.
Solid. Testing. If the LED remains amber for several
minutes, contact Enterasys Networks for
technical support.
Green Blinking. Image starts
running.
None.
Solid. Functional. None.
Red Solid. Processor in reset. None.
Green
and
Amber
Blinking. Indicates that
the DFE module is in the
process of shutting down.
None. This state is activated when the
RESET button is pressed for less than
1 second to a start the process of an orderly
shutdown.
While in this state, do not remove any DFE
module.