Specifications

clear maclock firstarrival
Enterasys D-Series CLI Reference 17-59
clear maclock firstarrival
UsethiscommandtoresetthenumberoffirstarrivalMACaddressesallowedperporttothe
defaultvalueof600.
Syntax
clear maclock firstarrival port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetMACfirstarrivalsonfe.2.3:
D2(su)->clear maclock firstarrival fe.2.3
set maclock agefirstarrival
UsethiscommandtoenableordisabletheagingoffirstarrivalMACaddresses.Whenenabled,
firstarrivalMACaddressesthatareagedoutoftheforwardingdatabasewillbe removedfromthe
associatedportMAClock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switchmode,read‐write.
port‐string Specifiestheportonwhichtoresetthefirstarrivalvalue.For adetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 6‐1.
port‐string Specifiestheport(s)onwhichtoenableordisablefirstarrivalaging.For
adetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 6‐1.
enable|disable Enableordisablefirstarrivalaging.Bydefault,firstarrivalagingis
disabled.