Specifications

clear port advertise
6-18 Port Configuration
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoconfigureport1toadvertise1000BASE‐Tfullduplex:
D2(su)->set port advertise ge.1.1 1000tfd
clear port advertise
Usethiscommandtoconfigureaporttonotadvertiseaspecificspeed/duplexcapabilitywhen
auto‐negotiatingwithanotherport.
Syntax
clear port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd
| pause}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoconfigureport1tonotadvertise10MBcapabilityforauto‐
negotiation:
D2(su)->clear port advertise ge.1.1 10t 10tfd
port‐string Clearadvertisements forspecificport(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedinthe
CLI”onpage6‐1.
10t Donotadvertise10BASE‐Thalfduplexmode.
10tfd Donotadvertise10BASE‐Tfullduplexmode.
100tx Donotadvertise100BASE‐TX
halfduplexmode.
100txfd Donotadvertise100BASE‐TXfullduplexmode.
1000t Donotadvertise1000BASE‐Thalfduplexmode.
1000tfd Donotadvertise1000BASE‐Tfullduplexmode.
pause DonotadvertisePAUSEforfull‐duplexlinks.