User Guide

WAN Interface Configuration Screen
Local Management User’s Guide 2-13
PPP as the Protocol Manager
Figure 2-7 WAN Interface Configuration Screen (PPP)
Refer to Figure 2-7 for the following parameters displayed for PPP.
PPP MRU (Modifiable) — Displays the modifiable Maximum Receive Units that PPP can handle.
ECP Enable (Toggle) — Toggles between On and Off to enable or disable encryption.
ECP Status (Read-Only) — Displays the status of encryption.
CCP Enable (Toggle) — Toggles between On and Off to enable or disable compression.
CCP Status (Read-Only) — Displays the status of compression.
Comp Ratio (Read-Only) — Displays the Compression Ratio, which is the ratio of
uncompressed to compressed data.
WAN INTERFACE CONFIGURATION
RETURN
SAVE
Interface Number: 003
Max Xmit Unit: 1526
ProtMgrIface: [0]
Active Protocol: PPP
PPP MRU: 1520
ECP Enable: [Off]
ECP Status: Off
CCP Enable: [Off]
CCP Status: Off
Comp Ratio: 1:1
2750_02
<host name> Local Management Flash Image Version: 02.xx.xx
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
CKT# IF# LID STATE
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
CKT# IF# LID STATE
016
017
001 Enet UP
002
Enet
DOWN
PORTS:
[1-32]