User Guide

IPX Configuration Screen
Local Management User’s Guide 1-49
IPX General Configuration Screen
The IPX General Configuration screen allows you to configure the HSIM or CyberSWITCH for
IPX routing.
To access the IPX General Configuration screen, use the arrow keys to highlight the IPX General
Config menu item and press ENTER. The IPX General Configuration screen shown in
Figure 1-18 displays.
Figure 1-18 IPX General Configuration Screen
IPX General Configuration Status Fields
The following list describes each of the IPX General Config status fields. The status fields are for
informational purposes only and cannot be modified.
Router Name — Displays the type of routing used.
Status — Displays the status of IPX Routing.
UpTime — Displays the amount of time elapsed since the last time the HSIM or CyberSWITCH
was rebooted.
Router Name: IPX
IPX Routing:ENABLED
UpTime: 0 days 0 hours 39 min
SAVE RETURN
IPX General Configuration
Version: XX.XX.XX
Status: Enabled
AdminStatusTime: 0 days 0 hours 39 min
System Level Setup
Port Level Setup
Port: 1
MAC Address: 00-00-1D-22-46-B0
Oper Status: Enabled
Description: Ctron CSX400 EnetPort 1
Interf. Type: ethernet-csmacd
Framing: Novell
MTU: 1500
IPX Address:
IPX Forwarding: DISABLED
+PORT-
IPX Routing: DISABLED
<host name> Local Management Flash Image Version 02.XX.XX
Router Name: IPX
IPX Routing:ENABLED
UpTime: 0 days 0 hours 39 min
SAVE RETURN
IPX General Configuration
Version: XX.XX.XX
Status: Enabled
AdminStatusTime: 0 days 0 hours 39 min
System Level Setup
Port Level Setup
Port: 1
MAC Address: 00-00-1D-22-46-B0
Oper Status: Enabled
Description: Ctron CSX400 EnetPort 1
Interf. Type: ethernet-csmacd
Framing: Novell
MTU: 1500
IPX Address:
IPX Forwarding: DISABLED
+PORT-
IPX Routing: DISABLED
<host name> Local Management Flash Image Version 02.XX.XX