User Guide

Local Management
1-48 Local Management User’s Guide
IPX Configuration Screen
The IPX Configuration screen enables you to access the IPX General Config, IPX RIP, and IPX
SAP screens to configure the HSIM or CyberSWITCH for IPX Routing and enable RIP routing or
Source Advertisement Protocol (SAP) routing on the HSIM or CyberSWITCH.
Access the IPX Configuration screen, shown in Figure 1-17, by using the arrow keys to highlight
the IPX menu item on the Router Setup and pressing ENTER. The IPX Configuration screen
displays.
Figure 1-17 IPX Configuration Screen
IPX Configuration Fields
The following list describes each of the IPX Configuration screen fields.
IPX General Config — Use this field to access the IPX General Config screen and configure the
HSIM or CyberSWITCH for IP routing.
IPX SAP — Use this field to access the IPX SAP screen and enable Source Advertisement
Protocol (SAP) routing.
IPX RIP — Use this field to access the IPX RIP screen and enable the Routing Information
Protocol (RIP).
IPX CONFIGURATION
IPX General Config
IPX SAP
RETURN
IPX RIP
IPX Router ID: 0.0.0.0
<host name> Local Management Flash Image Version 2.XX.XX