User Guide

IP Configuration Screen
Local Management User’s Guide 1-33
IP Configuration Screen
The IP Configuration menu screen enables you to access the IP General Config and IP RIP screens
to configure the HSIM or CyberSWITCH for IP Routing and enable RIP on the HSIM or
CyberSWITCH.
Access the IP Configuration menu screen, shown in Figure 1-13, by using the arrow keys to
highlight the IP menu item on the Router Setup screen and pressing ENTER. The IP Configuration
screen displays.
Figure 1-13 IP Configuration Screen
IP Configuration Screen Fields
The following list describes each of the IP Configuration screen fields.
IP General Config — Use this field to access the IP General Configuration Screen and
configure the HSIM or CyberSWITCH for IP routing.
IP RIP — Use this field to access the IP RIP screen and enable Routing Information Protocol
(RIP) routing on the HSIM or CyberSWITCH.
IP OSPF — Use this field to access the IP OSPF Configuration screen to configure and enable
OSPF for IP routing on the HSIM or CyberSWITCH.
IP CONFIGURATION
IP General Config
IP RIP
RETURN
201209
<host name> Local Management Flash Image Version 02.XX.XX
OSPF