User Guide

Local Management

1-12 Local Management User’s Guide

Accessing Local Management

This section explains how to access and use the Local Management menu screens. Menu screens

provide a path to the setup screens and status screens.

Using the Menu Screens

Once you have accessed the HSIM or CyberSWITCH through a TELNET connection, the

Password screen, shown in Figure 1-4, displays.

Figure 1-4 Password Screen

Type in your password and press ENTER. If you are doing an initial conﬁguration, you can type

the default super-user access password “public” or just press ENTER.

NOTE

Your password is one of the community names speciﬁed in the SNMP Community

Names screen. Access to certain Local Management capabilities depends on the

degree of access accorded that community name. See the SNMP Community Names

section.

Local Management

CABLETRON Systems, Incorporated

P.O. Box 5005

Rochester, NH 03866-5005 USA

(603) 332-9400

Enter Password:

201201

Device Model Number:

Serial Number:

Functionality Level:

Flash Image Version:

BOOTPROM Version:

Board Revision:

02.XX.XX

XXXXXXX

XXXX

XXX

XX.XX.XX