User Guide

Local Management Overview

Local Management User’s Guide 1-11

3. Repeat steps 1 and 2 until the Main Menu screen displays.

4. Use the arrow keys to highlight the EXIT command at the bottom of the Main Menu screen.

5. Press ENTER. The HSIM or CyberSWITCH Local Management Password screen displays

and the Local Management session ends.

Establishing a TELNET Connection

The HSIM or CyberSWITCH is shipped with a temporary IP Address of 192.168.254.254 so that

your computer can communicate with it over your Local Area Network (LAN) through a TELNET

connection. However, to establish a TELNET connection, your computer must be on the same

subnet as the HSIM or CyberSWITCH. Cabletron Systems recommends that you assign a

temporary IP Address of 192.168.254.253 to your computer to ensure that both devices are on the

same subnet. TELNET connections to the host device require the community name passwords

assigned at the SNMP Community Names screen or if you are doing an initial conﬁguration, you

can use the default password public.

Local Management Screen Hierarchy

Local Management consists of a series of menu screens that provide a path to each of the Local

Management function screens. Navigate through Local Management by selecting items from the

menu screen. Figure 1-3 shows the hierarchy of the Local Management screens.

Figure 1-3 Hierarchy of Local Management Screens

NOTE

See the instructions included with the TELNET application for information about

establishing a TELNET session.

Main Menu

Password

Setup Menu

System Level

SNMP Community Names

SNMP Traps

MIB Navigator

Flash Download

Bridge Setup

Router Setup

WAN Setup

IPX

IP General Config

IP RIP

IPX General Config

IPX RIP

IPX SAP

IP OSPF

2012_20